why the frequency Inverters Stopped Without Cause
Because the basic principle of the inverter is to provide a voltage-regulated FM power supply for the asynchronous motor to meet energy saving or process requirements, it has three parts: rectification, DC and inverter. If the external voltage is unstable, the DC voltage will drop, so that the inverter part cannot continuously output the set voltage level, which causes the inverter protection to stop.
Finally, We would like to share with engineers the common reasons that may cause the inverters stopping:
1. Whether the power supply voltage is normal, too high or too low will cause downtime.
2, the parameter setting is correct, and some occasions, such as constant pressure water supply, will reach the target pressure, it will automatically stop, etc., less than the target pressure, and then will re-open, this is normal.
3. Whether there are a large number of harmonics in the power supply, this needs to be detected by using a power quality analyzer or a hand-held oscilloscope.
4. The inverter hardware is faulty. Such as contactor and other hardware failures.
Return: Back to Previous Level
HOT SALE
-
TRS80 series soft starters with integrated bypass can greatly reduce the construction cost in its application. TRS80 is compact, easy to operate soft starter, designed for use with standard 3-phase motors. It provides an advanced method of reducing current during motor starting and stopping. TRS80 s...
-
Torrive TS510 series Variable frequency invertersReliability, user-friendliness, centralized functionality, easy to debugIGBT： Infineon & FujiCPU: Texas InstrumentsPCB: CoatedControl: &nbs...
-
Torrive TR510 series Variable frequency InvertersPower: 200kw,220kw,250kw,280kwIGBT： Infineon & FujiCPU: Texas InstrumentsPCB: CoatedProtected: IP20Certification: &...
-
Torrive TR510 series inverters with high performac 75KW, 93KWIGBT： Infineon & FujiCPU: Texas InstrumentsPCB: CoatedProtected: IP20Certification: CE Model...